-
42:Fine soldering of 0.6mm pitch
-
41:Soldering micro RF connector (female) and coaxial cable (shield)
-
40:Soldering of D-sub connector
-
39:Soldering coaxial cable shield and core wire to PCB at the same time
-
38:Soldering a glass thermistor and a wire
-
37:Plating wire to FPC and resin terminal
-
36:USB connector (A terminal) soldering
-
35:Soldering magnet wire wrapping terminals
-
34:Soldering heat sink aluminum PCB and cable
-
33:Soldering vinyl coated wire and PCB
-
32:A fixed quantity of uniform soldering
-
31:Basic operation that atomized flux
-
30:Soldering board and connector (1.27mm) without bridge
-
29:Automatic flux application
-
28:Soldering coaxial cable core to PCB
-
27:Soldering metal pattern and discrete parts
-
26:Insert the vinyl wire into the through hole and soldering
-
25:Method of soldering multi-core cable that does not contact the reed switch
-
24:Soldering SMD capacitor to PCB
-
23:Multi-core wire soldering, bundling and soldering vinyl wires
-
22:Soldering power terminals and through holes
-
21:Soldering L-type connector terminal
-
20:Soldering discrete components
-
19:Automatic soldering of lead terminal (caulking terminal)
-
18:Method of continuously soldering a square connector and cable
-
17:Method of vertical Y terminal and horizontal cable soldering
-
16:FPC bridge soldering / vertical
-
15:Soldering coaxial cable shield wire to PCB
-
14:Bridge soldering of FPC and PCB
-
13:Bridge soldering of PCB, V-shaped
-
12:Soldering vinyl wire directly to PCB
-
11:Wrapping magnet wire spot soldering and its operation
-
10:Soldering PCB through holes in full amount
-
9:Soldering discrete component leads and wires
-
8:Soldering vinyl wire to terminal block
-
7:Soldering SMD axial connector
-
6:Soldering axial cable to the piezoelectric
-
5:Soldering FPC and motor terminals
-
4:Soldering quartz oscillate
-
3:Uniform solder amount
-
2:Soldering terminals to the PCB in the case
-
1:Soldering connectors with uniform solder amount
